Milesight AT101 Industrial LoRaWAN GPS Tracker

51.570 HUF +VAT

Jász-Nagykun-Szolnok county, 5350 Tiszafüred

Hungary

Sharing:

4

 

 

Description
Milesight AT101 Industrial LoRaWAN GPS Tracker - High accuracy positioning

The Milesight AT101 allows you to use GNSS and highly accurate positioning data from Wi-Fi scanning to protect and monitor your valuable assets, anywhere, anytime!

The device simultaneously uses GPS, GLONASS, Galileo and Beidou positioning systems and also supports Wi-Fi AP MAC address scanning. Wi-Fi scanning helps you to locate in places with weak GNSS signal.

Three modes tailored to your needs

Enables efficient and seamless monitoring with "motion" mode, "periodic" mode and "time tracking" mode.

- Motion mode: get up-to-the-minute alerts when devices start and stop.
- Timing mode: receive information on the position and status of the tracker at preset times.
- Intermittent mode: get information on the position and status of your tracker with customized reporting intervals from 1 to 1440 minutes.

Access to vehicle routes

In motion mode, it is also possible to enable the "On the Move Reporting Interval" function, allowing the user to retrieve the vehicle trail, which facilitates positioning and tracking of the stolen vehicle.

A high level of asset protection with Geofencing, a geofencing function.

The Geofencing or geo-fencing feature focuses on a virtual perimeter around a specific geographic location. Users can receive alerts when devices leave or return to the defined zones.

Industrial design with anti-theft feature

The Milesight AT101 LoRaWAN GPS tracker features an ultra-strong IK09 impact-resistant housing with IP67 dust and water protection, making it reliable even in harsh industrial environments. The device is also equipped with a tamper button on the back to monitor the installation status. If the device is to be removed, an alarm signal is sent, preventing malicious disassembly.

Easy configuration and protection against malicious attacks via Bluetooth

- The AT101 now supports not only NFC configuration but also Bluetooth configuration.
- It keeps a log of unauthorised use and alerts users of communication errors.
- A waiting time is activated if the user enters an incorrect password 5 times.
- Password re-entry is mandatory if the configuration takes longer than 1 minute.

Additional alarm functions

- The AT101's built-in 3-axis accelerometer can be used to monitor the tilt angle of the device and alert users if the device is not correctly positioned, has moved out of position or if the tilt angle of the monitored machine has changed (e.g. tilt detection).
- With the built-in NTC thermistor, the EM400-TLD can monitor the ambient temperature and send an alarm if it detects a sudden change in temperature, e.g. in case of fire.

Battery operation for several years

The battery life of the Milesight AT101 LoRaWAN GPS tracker is more than 15 years* (with twice daily position updates).

* If the position is updated ten times a day, the battery life is eight years.
** If the position is updated every hour of the day, the battery life will be four years.

LoRaWAN® based communication

The AT101 LoRaWAN GPS tracker can be combined with Milesight or other manufacturers' LoRaWAN® gateways to achieve long-range communication and check the status of the sensor virtually anytime and anywhere you need it, even at a greater distance from the LoRaWAN® network gateway (range up to 15 km in rural areas, 2 km in urban environments).

Storage capacity with 1000 historical data records

The AT101 can store up to 1000 sets of historical data records locally. It also supports data retrieval and data reloading to avoid data loss and ensure data integrity. Data can be stored on the device and cannot be manually deleted, further ensuring traceability of reported information.

Easy management

Switching ON/OFF and configuration is possible via the Milesight ToolBox (Android/iOS) mobile app via NFC or Bluetooth connection. Just install and run the Milesight ToolBox app. Activate NFC or Bluetooth communication on your phone. For NFC, tap the sensor in the appropriate location. Once scanned, you can start managing the settings.