Bead breaker - mulcher - JANSEN AGF-140

2.760 EUR

Szlovákia

Sharing:

9

 

 

Description
Grass crusher - mulcher - JANSEN AGF-140
https://www.vivago-gepker.hu/Rezsu-szarzuzo-mulcsozo-JANSEN-AGF-140-SN48

VAT FREE PURCHASE
Companies and sole traders within the European Union Member States and with an EU Community tax number have the possibility to purchase our products and machines immediately at net price.

All prices are net prices.

Extremely robust design.

When the mower is fully extended to the side, the distance between the centre of the tractor and the outer edge of the mower is approximately 233 cm. The working width is 138 cm.
Our mulchers are characterised by very good workmanship. They have proven themselves over the years, whether in pastures for horses, ditches or mowing and crushing at the same time. Our mulchers are mainly used for landscaping, but they are also used in municipal services, in forestry for the maintenance of soil where trees have been planted, in orchards and vineyards, between fruit trees and bushes. They are made of thick material and have a robust power transmission. The special design helps to ensure even crushing.

Given its robust design, the mulcher can easily process branches and small pieces of wood without damaging the machine.

The mowing height can be adjusted with side runners. It has 12 specially hardened blades weighing 1.2 kg.

Vibrating, galvanised slats on the front of the mower prevent stones from flying out.

The rear cover can be opened, which is optimal for chopping straw and ensures easier maintenance and repair.

A double helix on the rotor evenly loads the rotor and ensures extremely smooth running and long life with much less effort. Even very tall grass and thick straw are no problem for this mulcher!
The mower is mounted on the tractor with three-point suspension (Cat II, with slight modifications also Cat I).

The tractor must have at least 40 hp.

The transmission shall be dry. Approximately 1 litre of 80W90 oil should be added when the tractor is put into service.

Technical data:

- Cutting width: 1380 mm
- Weight: 745 kg
- Tilt angle: + 90° to -55°.
- Blade type: 1.2 kg hammer
- Blade Ø: 145 mm
- Rear roller Ø: 145 mm
- Cardan shaft: part of the package
- Suspension: three-point suspension Cat.
- Tractors: min. 40 hp, 540 rpm
- 4 belts