DRILL MASTER billet drill

Pest county, 2111 Szada

Hungary

Sharing:

8

 

 

Description
The stump drill can be quickly removed and mounted on the back of the tractor, so it does not constantly occupy a power machine.

✅ stump drill for nurseries, orchards, forestry and municipal use
✅ drill head: 40 cm / 80 cm / 110 cm
✅ TLT 540 rpm
✅ power requirement: 65-140 HP
✅ 3 point suspension

The DRILL MASTER TRIMMING DRILL chips the ground surface and below the log. The chipped material can be immediately recycled back into the soil life cycle, so that young saplings can be planted directly on the site of the chipped stump.

- Saving time and energy
The chipped stump residues do not need to be collected and transported. The decomposing wood is the perfect source of nutrients for newly planted saplings. The high quality steel drill head and simple and durable construction ensure long life and years of reliable service.

- Can be mounted on the power tool in 5 minutes
The stump drill can be quickly removed and mounted on the back of the tractor, so it doesn't take up a power tool all the time. The implement is suspended on 3 points. It can be easily mounted on the two lower points or on the mounting point on the tractor's rear hitch bracket.

- Areas of use
in the field quality of poplar plantations and forest areas
in plantations with shallow root systems, such as orchards
in areas designated for reforestation
for municipal purposes, municipalities for the replanting of trees

- Advantages of the stump grinder, stump grinder
There is almost nothing like it, but... despite this, the manufacturer has put together features that make it stand out from the competition:
- a special drill head structure
Drill Master drill bits are available in 40, 80 and 110 cm.
- 80, 80, 80, 80 and 80 drill bits, 80 and 80 drill bits, 80 and 80 drill bits, 80 and 80 drill bits, 80 and 80 drill bits, 80 and 80 drill bits, and 80 and 80 drill bits.
Increases the power transmitted by the tractor to more than 20 000 newton. It doesn't stall when it hits the root system below the soil surface, and the recoil generated when it does has no effect on the frame structure.
- soil life
The fragmented chips can be mixed into the soil immediately after using the stump grinder. The micro-organisms in the soil corrode it, thus preserving the organic matter structure of the soil.
- Efficiency
It takes on average one minute to chip a tree root around 35-60 cm.
- Usability
Can be fitted to all tractors from 65 to 140 HP.
- Functionality
Using the stump grinder does not deform the soil structure and does not create deep pits, unlike digging with an excavator. No large tree stumps are left in the area, so it can be ploughed immediately after the work is done.

Contact PENDA ▶ penda.hu"