SOIL DRILL FOR TRACTOR JANSEN TBG-300

1.500 EUR

Szlovákia

Sharing:

7

 

 

Description
We have many other machines on offer on our website!
www.vivago-gepker.hu

VAT FREE SHOPPING
Companies and sole proprietors within the European Union and with an EU Community tax number have the possibility to purchase our products and machines immediately at net prices.

SOIL DRILL FOR TRACTOR JANSEN TBG-300
https://www.vivago-gepker.hu/TALAJFURO-TRAKTORHOZ-JANSEN-TBG-300-SN25-3

The most robust drill in our range for tractor three-point suspension (category 1 or 2). Thanks to the very robust power transmission and the thick wall of each drill (9 mm), even gravel soil can be drilled!
The augers are manufactured in Europe to our specifications and are subject to strict quality control. We have been selling these tools very successfully for some years. Unlike many "cheap drilling rigs", our drilling rigs are reliably performing their tasks on high power tractors thanks to their robust construction. Our drilling rigs have specially reinforced equipment. Ground drilling rigs are often very similar, but a closer look reveals clear differences in quality and stability.

The drill can be connected to a category 1 or 2 suspension and has a safety system to prevent damage to the gearbox, axle and tractor. The power of the tractor must be at least 30 horsepower (more, depending on the size of the drill bit).

Also supplied with an adjustable PTO shaft/drive shaft guard. Cardan shaft speed shall be 540 rpm.

Drills available in 150 mm, 200 mm, 300 mm, 450 mm, 500 mm and 600 mm. They are approximately 1,10 m long. The knife blades can always be unscrewed from the drill shanks and are easily interchangeable. The drill tip is welded.

Our drills are universally applicable and are mainly used in horticulture and landscaping, fencing, agriculture and forestry, drainage or planting. The range of applications is very wide.

Specifications:
- TLT speed: 540 rpm.
- Tractor power: min. 30 HP (more depending on the size of the drill)
- Weight: 130 kg including PTO (PTO rod)
- PTO with PTO drive (PTO drill with PTO gearbox)
- Specially reinforced
- Gear ratio: 1:3
- 3-point suspension attachment, cat. 1 or cat. 2
- Very robust design
- European production
- Weight of packaging: approx. 130 kg
- Packaging dimensions: 215 x 80 x 53 cm (HxWxD)

Note:
Before putting into operation, the tiller gearbox must be filled with 1.9 litres of 80W90 oil.