Wheel irrigation equipment

7.000.000 HUF +VAT

Hajdú-Bihar county, 4060 Balmazújváros

Hungary

Sharing:

6

Description
Description
The Side Roll is structurally the predecessor of the self-propelled multi-stage machine (Linear), except that it does not move during irrigation. The machine rolls from one operating position to another on wheels parallel to the branch line. By operating between the rows, trampling damage during travel is minimised.

Rolling versions are simple to operate, making them economical for use in low-growing crops. Its twelve metre long tubular sections are made of reinforced aluminium and are connected by quick couplings for power transmission. The pipe provides the machine's axis of rotation and transmits the power to advance along the pipe. The tube has a diameter of 127 mm, is 12 m long and has a wall thickness of 2,2 mm. The total length is 396 m (33 pieces, 12 m aluminium tube) and it rolls on 32 wheels.

The 12 m nozzle spacing is 12 m, with intermediate pieces branching off the pipeline, where the tilting arm nozzles are connected. The vertical position of the nozzles is ensured by a special design.

The diameter of the wheels is 1930 mm and the wheels are available in several sizes, so that they can be used in different crops.

They are driven by an 8 Le Honda petrol engine mounted in the centre of the wing guide, via a hydraulic pump with a hydraulic motor that transmits the movement by chain drive. The drive is rotated while the pipeline as an axle is moving.

After the irrigation job is completed, the spine line is drained to allow the machine to move more easily on the wet ground. The length of the advance is the distance of a nozzle, 12 m. The time required for one irrigation is 1 to 8 hours, depending on the characteristics of the soil.

The Side Roll is operated as follows:

1) After watering a single job, the operator shuts off the hydraulics and, as the water pressure drops, the drain valves of the pipelines open and the water inside flows out in a few minutes so that, when changing over, the stagnant irrigation water does not increase the weight of the machine.
2) The hose is installed at the distance corresponding to the next position.
3.) The operator then rolls the machine to the next position by starting the motor in the middle of the hose.
4) By switching on the water delivery hose and opening the corresponding hydrant slide valve, the irrigation of the next area strip in line is started.

Main features:
- ISO 9001 certification.
- Pipe diameter: 127 mm (2,2 mm wall thickness, aluminium material)
- Irrigable area from one irrigation point: 0,4752 ha
- Inlet water pressure: 3,0 - 5,0 bar
- Flow rate per nozzle: 1,64 - 3,2 m³/h
- Nozzle material: brass
- Wheel diameter: 1930 mm
- Grip capacity: ≤ 24%
- Irrigation intensity: 9 - 17 mm/h
- One main unit with 4 wheels
- Flow rate through the sprinkler: 75 - 120 m³/h
- Total length: 396 m
- Drive power: 8 Le (with petrol engine)
- Drive: hydraulic

The manufacturer is characterized by fast service and high precision technology! First in Europe and first in Hungary in this millennium!!

--------------------------------------------------
WANT TO BUY THE PRODUCT - INTERESTED IN PRICES?
CALL US: +36 30 399 3509 (Opening hours: Mon-Fri 07:30-16:30), we will help you and send you our price offer!
--------------------------------------------------