HORSCH LEEB 6.300 VN self-propelled sprayer

1.758.000 HUF +VAT

Fejér county, 8000 Székesfehérvár

Sharing:

2

Description
Container size, spreading frame:
- 6.000 litre PE spray liquid tank with digital level indicator
- 30 / 24 m working width sprayer wheel
o Robust design
o Patented frame control: prevents wobble in the table end turns by actively controlling the centre section
o Torsion frame suspension on the paralelogram, hydraulically sprung and damped
o Nozzle protection plate against mechanical damage and protects the outlet droplets against the wind
- Hydraulic spreader height adjustment for 160 cm belly height in the range 0,30-2,80 m
- Hydraulic spreader height adjustment for 200 cm belly height in the range 0,80-3,20 m
- Continuous recirculation of spray liquid over the entire length of the spreader wheel: starts immediately when spraying is started
- BoomControl Pro sprayer control with 4 ultrasonic sensors:
o Precise height control up to 30 cm from the target surface even at high working speeds
o Minimal drift with the low-guided spreading frame
o Independent angular positioning per side
- BoomControl Pro extension with +2 ultrasonic sensors for greater accuracy
- AutoSelect nozzle control: automatic switching between nozzles and pre-programmed nozzle combinations
- Pneumatic nozzle switching 2-2 4M: 2x2 position manual nozzle bodies with 25 cm nozzle spacing, with left and right hand nozzles
- Anti-splash guard on the sprayer frame behind the wheels
- Pneumatic section coupling with 13 sections, with standard spacing:
o 2 x 1,5 // 1,5 / 7 x 3 / 1,5 // 2 x 1,5 m
- 64 Lechler IDKN 120-03 injector nozzle with bayonet lock (standard accessory)
- 64 pcs Lechler IDKN 120-04 injector nozzle with bayonet fitting (proposal)
- 64 pcs Lechler IDKT 120-03 double jet nozzle with bayonet coupling (proposal)
- 64 pcs Lechler IDKT 120-04 double blade nozzle with bayonet coupling (proposal)
- 64 nozzle extensions for front row IDKT nozzles (proposal)

Motor, hydraulic system:
- 310 hp (230 kW), 6.7 litre, six-cylinder FPT engine with Stage V emission standard
- Three separate hydraulic pumps for the drive of the running gear and the working hydraulics
o 350 l/p Load Sensing pump for powering the undercarriage
o 200 l/p Load Sensing pump for fan and spray pump drive
o Steering, brake, other systems 120 l/p Load Sensing pump

Structure:
- Hydro-pneumatic damping with active level control
- PowerGear drive with high torque
o Front bridge: 170 cm³ / rear bridge: 230 cm³ with hydraulic motors
- Intelligent all-wheel drive: dynamically distributed drive torque
- Fully continuously variable hydrostatic drive with wet multi-disc brakes in the range 0-50 km/h on the road, 0-25 km/h in the range 0-32 km/h in the field
- Front-wheel steering only (road mode), four-wheel steering (field mode), automatic slope control, manual rear-wheel steering
- VF 420/95 R50 MICHELIN SprayBib tyres
- Hydraulically and infinitely adjustable track width from 2.25 to 3.00 m with the above wheel sizes
- Hydraulically and continuously adjustable ground clearance from 160 cm to 200 cm with the above wheel size
- Plant protection covers on the wheels and on the underside of the machine

Water system:
- CCS Pro water system
o 1,000 l/min with stainless steel centrifugal pump (max. 450 l/min and 8 bar on the discharge side)
o Electric control valves on suction and discharge side
o Automatic washing programmes
o Pressure control by pump speed
o Energy-saving: the pump delivers only the amount of liquid required for spraying plus mixing
o Auxiliary pump for clean water, for continuous cleaning of the tank and spray wheel while the main pump empties the rinse water - quickly reducing the concentration
o Pressure filter with automatic rinse function
o Second pressure filter on the centre member of the spray wheel
- 750 litre fresh water tank
- 15 litre hand wash tank
- 52 litre stainless steel chemical mixing tank with tank wash nozzle
- 3" Kamlock quick coupling on the side of the machine for suction
- 3" Kamlock quick coupling on the right front of the machine for filling with an external pump

Panoramic front cabin:
- Cat. IV filtration system with protection against aerosols and vapours
- Cockpit comfort package: phone holder, cup holder, velour carpet, footrest, sunshades on right and left, additional terminal rail
- High-performance automatic climate control
- Sprung driver's seat with seat heating and seat climate control
- Height and length adjustable, spring armrest
- Integrated controls and joystick in armrest
- Height-adjustable and tiltable steering column
- Electronically adjustable heated exterior mirror
- Passenger seat
- Numerous storage compartments, 1 refrigerated

Lighting, accessories:
- 4 standard LED work lights on top of the cabin
- LED work lights to illuminate the area in front of the spreader
- NightLight LED nozzle lighting with automatic switch-off and cleaning in the turning areas
- 2 amber indicators on the front of the cabin roof, 1 on the spraying wheel
- Camera system: monitor with reversing camera
- Additional camera for monitoring the right front wheel
- Safety package (hazard warning triangle, visibility vest, first aid kit)
- Field Support Kit wear parts accessory kit

Controls, controls:
- Control with Trimble GFX-750 terminal (with SectionControl release)
- Trimble automatic steering with factory installed NAV-900 antenna (15-20 cm accuracy)
- Gear shifting with throttle or gear lever (no need to change gears)
- Engine limit load control
- Engine overspeed control
- Cruise control
- End-of-travel automatic

Dimensions and weights:
- Machine weight unladen: 13.000-14.500 kg (depending on equipment)
- Max. gross vehicle weight: 18,000 kg (PowerGear - road)
- Axle spacing: 4,300 mm
- Length: 11,700 mm (depending on equipment)
- Height: 3,990 mm (depending on equipment)
- Overall width: 2,980 mm (with 2.25 m track, depending on equipment)