POMOT T544-1 6700 litre chassis mounted siphon tanker

15.960 EUR +VAT

Borsod-Abaúj-Zemplén county, 3527 Miskolc

Hungary

Sharing:

5

Description
Sump tankers 6700 l
STANDARD EQUIPMENT
1. Tank
➢ hot-dip galvanised tank inside and outside
➢ passive protection of the tank to protect the zinc coating against sludge
➢ rear opening ø700 mm - door cover
➢ tubular level indicator
➢ drain connection with 1 1/2" valve - at the lowest point of the tank
➢ 4" inspection port at the rear
➢ top opening ø350 mm

2. Trolley design: chassis mounted
➢ CHASSIS - tank mounted on a closed profile frame
➢ interchangeable towing hook - 50 mm
➢ mechanically adjustable support leg

3. Single axle chassis or two axles with springs
➢ tyres according to the table
➢ mudguards
➢ dual circuit pneumatic braking system with four-stage brake force control
➢ parking brake

4. Compressor - type according to table
➢ drive 540 rpm or 1000 rpm - on request
➢ reinforced, heat resistant fitting connecting hoses
➢ overflow protection by means of two ball valves on top of the tank and siphon with sight glass
➢ pressure gauge
➢ two safety valves: overpressure up to 0,05 MPa and low pressure up to -0,05 MPa
➢ oil separator - wet air filter, compressor silencer

5. 6" (150 mm) pipe connection
➢ main drain connection on 6" rear port cover - with 6 hydraulic latches
➢ left and right side pipe connection preparation
➢ rear pipe connection prepared
➢ at the rear, a blind blind pipe, prepared for manual installation of the valve

6. 12 V electrical and lighting installation

7. 6" hose (ø150)
➢ the suction handles for the suction hose
➢ hose with suction basket - protects large objects
➢ suction hose length - 6 m

8. Filling device
➢ Profiled spray nozzle, POMOT 94 pattern, width up to 14 m

Ask our sales colleagues for more information: