Steel bridge balance with side guide

Csongrád-Csanád county, 6800 Hódmezővásárhely

Sharing:

14

Description
Description
Type: M18 steel bridge scale with side guide
Length of scale: 18 m
Bridge scale width: 3 m
Capacity: 60 t/20 kg

Bridge scales with steel structure, available with ramp (+26 cm).

The load-bearing structure of the M-type bridge scale consists of 4 interconnected main girders made of hot-rolled IPE 500 steel and the bridge elements that are mounted on top of and connect them. The IPE 500 main beams, which run lengthwise along both sides of the scale, provide a safe guiding system and protect the vehicle from accidental slipping. This construction does not require the installation of a guardrail for protection.

The bridge elements mounted between the main beams are made of I 160 section beams, 20 mm thick rough plate end plates, 8 mm thick steel plate walking surface with lenticular pattern, with appropriate reinforcing ribs at the bottom. The bridge structure thus formed is supported by 6 weigh cells.

The gravity is transmitted to the 8 load cells by self-adjusting clamps in such a way that they can move in all directions. The movement of the truck scales is limited by flexible longitudinal and lateral buffers, and their return to the initial position is ensured by the self-resetting design of the weigh cells. The buffers, mounted on the bridge structure, provide a flexible impact between the weighbridge and the edge protection iron of the driveway or manhole, thus avoiding the harmful effects of pure metallic impact.

The cables of the weighing cells are connected in a junction box on the weighbridge, from where the signals are transmitted via a weighing cable to the weighing instrument, which gives a digital indication of the weight of the vehicle on the bridge. The weighing instrument has an RS-232 computer output and an Ethernet port, so that the weighing ticket can be printed via the Road Bridge Weighbridge Register software on a PC and printer provided by the Customer.

There are no removable mounting holes on the bridge deck, as the weigh cells are side-mounted. The truck scale movement is limited by flexible length and side stops, and reset to the initial position is ensured by the self-locking design of the weigh cells. The buffers, mounted on the bridge structure, provide a flexible impact between the weighbridge and the edge protection iron of the driveway, thus avoiding the harmful effects of pure metallic impact.

Our company provides the foundation drawings for the construction of the drive-on scale base.

We can also provide turnkey construction with the construction of the necessary concrete substructures, roads, cable lines and drainage.

We provide free on-site survey and consultation for our prospective clients.

The installation of the scales is very simple and quick (2 days). Due to the construction, the scales can be operated with very low maintenance.

Our products comply with the class III accuracy required by the MSZ EN 45501 standard and the MKEH specifications.

Our scales are type-approved in all European Union countries.

We have a nationwide service network to provide our customers with fast and cost-effective troubleshooting, maintenance and periodic certification.

Available options:

Outdoor secondary display
Bridge balance register portal program
Turnkey construction (construction of weighing platform, construction of access roads)
Automated weighing (CCTV cameras, number plate recognition cameras, vehicle identification, infrared speed cameras, traffic lights, turnstiles, automatic logging)

Call our expert colleague Peter Vas and ask for a quote!