Copper scythe 183 Advertisements
Automatic translation
Advertiser for 10 years
New
Copper scythe Veszprém, Tüskevár
- 160 - 240 mm working width - reinforced design - mechanically opening rear door - horizontal rotor fitted with hammers - working position: +90°/-65° - with lateral sliding feet - with rear support roller - 540 rpm/min drive
Automatic translation
760.000 HUF +VAT
Advertiser for 9 years
New
Copper scythe Győr-Moson-Sopron, Győr
AGL145 Copper crusher, bench top Application: - Road edges, slopes and ditches - green areas - maintenance of pastures, meadows, scrubland - orchards and nurseries Advantages: - copes with neglected terrain where there are more stones, branches and...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
HYMACH JUICE and FRUIT are recommended for crushing vineyards and orchards, as well as for mowing and maintenance of vegetation in large public parks, roadside areas, ditches and embankments. The HYMACH JUICE and FRUIT rear-mounted, laterally...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The AGRIMASTER EXPERT SHARK copper trenchers can be used for cleaning and maintenance of ditches, gullies, roadside areas, parks and other agricultural and communal areas. Recommended for professional users. Minimum tractor weight (kg): 1800 TLT...
Automatic translation
2.920.000 HUF +VAT
Advertiser for 9 years
New
Copper scythe Szabolcs-Szatmár-Bereg, Nyíregyháza
Working width: 2 m, engine requirement: 80 HP. Drive speed: 540 rpm, weight: 860 kg. Area performance: 0.8 - 2.5 ha. Stubble height can be adjusted in steps. Number of knives: 18 pcs. Delivery width: 2250 mm.
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The HYMACH ESPRIT TDH L/TC is also recommended for professional users for the maintenance of vegetation in medium surface public parks, roadside areas and ditch banks, embankments and for crushing stems. The ESPRIT TDH is a good choice for both...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The ILD02 is the best-selling model of the Spider. Designed to handle extreme slopes, it can be used for difficult access areas, hazardous terrain, fine grass and large surfaces. The patented drive with skid steer system allows mowing in all...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Agrimaster is the exclusive importer of PENDA! The AGRIMASTER SHARK R rear 3-point hitch professional brass mowers can be used for mowing road embankments, roadside ditches, gutters, parks and other green public areas in both agricultural and...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Standard equipment: - Independent hydraulic equipment with gear hydraulics, pump and hydraulic motor. - Independent hydraulic power unit with independent hydraulic pump and independent hydraulic transmission (540 min-1 for TLT). - Heat exchanger. -...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The SPIDER CROSS LINER and CROSS LINER LITE are the latest addition to the SPIDER family, with an impressive compact design, ground following cutting system, stabilising winch, sliding steering and HONDA engine powered drive. These features ensure...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Working width: 125 cm Min. tractor weight (kg): 2200 TLT rev. no.: 540 Weight (kg): 868 CP knife: 40 M hammer: 20 S hammer: 20 A knife: 40 D knife: 40+20 The SHARK B rear 3-point suspension brushcutters can be used for mowing road embankments,...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
"With the latest generation of Kawasaki EFI engines, the SPIDER mower is unbeatable - on any terrain. Key features: - area output: 8500 m2/h - Working width: 123 cm - Maximum slope: 60°. - control: radio remote control - own weight: 387 kg The...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Working width (cm): 110 Min. power requirement (HP): 20 TLT (f/p): 540 Weight (kg): 236 Y number of blades (pcs): 56 The AGRIMASTER MICRO outboard mowers can be used for the maintenance and mowing of parks, public areas, road verges and ditch banks,...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Standard equipment for HYMACH dry crushers: - Independent hydraulic equipment with gear hydraulics, pump and hydraulic motor. - Transmission (540 min-1 for TLT). - Heat exchanger. - Bowden type remote controlled hydraulic manifold. - Impact...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The SPIDER 2SGS is the only mulcher specifically designed for the maintenance of solar park areas. The body of the proven SPIDER ILD02 model has been modified to provide unchanged performance at a lower output. The designers took into account that...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Power requirement (HP): 70 Arm extension cm: 700 Cartesian: I Weight (kg): 2400 Minimum tractor weight (kg): 3500 The Hymach EMPHASIS TDH M/TC series is recommended for professional users for the maintenance of vegetation in large public parks,...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
SPIDER ILD01 is one of the oldest products of the manufacturer, launched in 2004. The Red Dot Design award-winning, remote-controlled mulcher is designed for professional users for medium sized areas, including extreme and unstable slopes, up to...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Equipment of basic stem crushers: - Independent hydraulic equipment with piston hydraulics, pump and hydraulic motor. - Transmission (540 min-1 for TLT). - Heat exchanger. - Bowden type, remote controlled hydraulic distribution unit. - Impact...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
"With the latest generation of Kawasaki EFI engines, the SPIDER mower is unbeatable - on any terrain. Key features: - area output: 8500 m2/h - Working width: 123 cm - Maximum slope: 60°. - control: radio remote control - own weight: 387 kg The...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The Hymach EXPANSE FLEXOR TPH P/TC series is recommended for professional users for the maintenance of vegetation in large public parks, roadside areas and ditch banks, embankments and for crushing stems. The Hymach EXPANSE FLEXOR TPH P/TC...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The Hymach EXPANSE TDH P/TC series is recommended for the maintenance of vegetation in large parks, roadside areas and ditch banks and embankments for professional users. Power requirement (HP): 130 Arm reach (cm): 1000 Cart telescope: 2 Weight (kg):...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The AGRIMASTER SHARK B 540 FRONT is recommended for both agricultural and municipal users for the maintenance of ditches, gullies and roadside areas, as well as for mulching and drying other less well-maintained areas. The advantage of the front...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Working width (cm): 181 Minimum power requirement (HP): 30 TLT (f/p): 540 Weight (kg): 325 Y+I number of blades (pcs): 48+24 The AGRIMASTER XL and XZL hedge trimmers can be used for trimming parks, public areas, road verges and ditches, hedges and...
Source language: Hungarian
Advertiser for 9 years
New
Copper scythe Győr-Moson-Sopron, Győr
AM100 típusú, 100 cm munkaszélességű karos rézsűzúzó Alkalmazás: útszélek, lejtők, töltések és árokpartok gondozására Az AMC kiegészítő adapterrel ( a képen) akár sövény nyírására, kaszálásra is alkalmas. ( Kiegészítőként, felár ellenében rendelhető)...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Working width (cm): 125 Weight (kg): 1370 Horizontal extension (cm): 600 The AGRIMASTER GOLDEN SHARK ZP copper cutters are recommended for cutting vegetation on road embankments, roadside ditches, gullies and parks, for professional users in both...
