Copper scythe 182 Advertisements
Automatic translation
1.350.000 HUF +VAT
Highlighted Advertiser for 15 years
New
Copper scythe Szabolcs-Szatmár-Bereg, Nyíregyháza
For cleaning roads, ditches, embankments, gardens and green areas. With hydraulic tilting angle up to 90° vertical position for pruning and shredding hedges. Recommended for mowing, pruning and cutting branches up to 2.5 cm in diameter. Use: mounted...
Automatic translation
3.300.000 HUF +VAT
Advertiser for 9 years
New
Copper scythe Veszprém, Tüskevár
SSAB Swedish steel frame Suspended category: II Double-plate welded counterframe Cardan shaft: 540 rpm Working width: 1600 mm Transport width: 2100 mm Self-weight: 700 kg Power requirement: 65-130 HP Rear support roller: 140 mm Number of V-belts: 4...
Automatic translation
Advertiser for 4 years
New
Copper scythe Jász-Nagykun-Szolnok, Szolnok
Manufacturer: eagle FRONTONI, Italy Importer in Hungary: Agrowolf Kft. Tractor 3-point hitch mounted, arm mounted brass crushers for cleaning and maintenance of roadsides, canals, earth edges, etc. Power requirement: 40-70 HP Tractor weight...
Automatic translation
708.654 HUF +VAT
Advertiser for 11 years
New
Copper scythe Heves, Hatvan
High-quality horizontal hammer-axle skid steer for Japanese and other tractors. Type: KDL AGRI AKL-145 Cutting width: 145 cm Total width of the machine: 158 cm Minimum power requirement: 30 Le (max. 45 Le) Tilt angle adjustment in upward direction:...
Automatic translation
Advertiser for 4 years
New
Copper scythe Jász-Nagykun-Szolnok, Szolnok
Manufacturer: eagle FRONTONI, Italy Importer in Hungary: Agrowolf Kft. Radio remote controlled, self-propelled copper crushing machine for safe cleaning and maintenance of hard-to-reach areas. Working width: 120 cm Max working angle: 70% Crushable...
Automatic translation
653.535 HUF +VAT
Advertiser for 11 years
New
Copper scythe Heves, Hatvan
High-quality horizontal hammer-axle skid steer for Japanese and other tractors. Type: KDL AGRI AGL-125 Cutting width: 125 cm Total width of the machine: 135 cm Minimum power requirement: 20 Le (max. 40 Le) Tilt angle adjustment in upward direction:...
Automatic translation
Advertiser for 4 years
New
Copper scythe Veszprém, Nagyvázsony
Manufacturer: FRONTONI s.a.s, Italy Front-mounted arm-type grapples for tractors for the maintenance of road edges, earth edges, canals, fish ponds, etc. Crusher head positioning - from the tractor centre line: 3,8 m; 4,0 m; 4,1 m; 4,4 m - depending...
Automatic translation
Advertiser for 4 years
New
Copper scythe Veszprém, Nagyvázsony
Manufacturer: Oy ELHO Ab, Republic of Finland Oy ELHO Ltd. Available with chain or hammer blade heads. Power requirements: 100 - 150 HP Tractor weight requirement: 8500 kg Crusher head working width: 2,1 m Working angle (up/down): 180/90 Crusher head...
Automatic translation
Advertiser for 4 years
New
Copper scythe Veszprém, Nagyvázsony
Manufacturer: Oy ELHO Ab, Republic of Finland Professional chain crushers for cleaning and maintenance of agricultural land, soil edges, road edges, forest roads and canals. ELHO chain crushers are particularly suitable for cleaning stony areas where...
Source language: Hungarian
Advertiser for 4 years
New
Copper scythe Veszprém, Nagyvázsony
Traktor 3-pontra csatlakoztatható karos kihelyezésű rézsűzúzók, útszélek, földszélek, csatornák tisztításához, karbantartásához. Traktor igény: 80 - 120 LE Zúzófej szélessége: 1,0 m; 1,2 m Y-késekkel(széria) vagy kalapácskésekkel(opció) Zúzható...
Automatic translation
Advertiser for 4 years
New
Copper scythe Jász-Nagykun-Szolnok, Szolnok
Manufacturer: eagle FRONTONI, Italy Importer in Hungary: Agrowolf Kft. Tractor mounted 3-point hydraulic laterally tiltable and hydraulically extendable brass crushers. Working widths of crushing head: 100 cm, 120 cm, 130 cm, 150 cm, 160 cm, 180 cm,...
Automatic translation
Advertiser for 4 years
New
Copper scythe Veszprém, Nagyvázsony
Manufacturer: Oy ELHO Ab, Republic of Finland ELHO Ltd. With hammer blade or chain crusher heads. Working width of crushing heads: 2,1 m Crushable diameter: 10-12 cm (hammer blade); max. 8 cm (chain) Crusher head position: 5,2 m from the tractor...
Automatic translation
Advertiser for 10 years
New
Copper scythe Veszprém, Tüskevár
- 160 - 240 mm working width - reinforced design - mechanically opening rear door - horizontal rotor fitted with hammers - working position: +90°/-65° - with lateral sliding feet - with rear support roller - 540 rpm/min drive
Source language: Hungarian
Advertiser for 9 years
New
Copper scythe Hajdú-Bihar, Debrecen
Tisztelt Gazdálkodó! A Royal Traktor cégcsoport, az ország egyik legnagyobb raktárkészletével és legsokoldalúbb palettájával rendelkezik. Mezőgazdasági, talajmegmunkáló gépek, építőipari, kommunális, kertészeti, zöldség és gyümölcstermesztés,...
Source language: Hungarian
Advertiser for 9 years
New
Copper scythe Bács-Kiskun, Kecskemét
Tisztelt Gazdálkodó! A Royal Traktor cégcsoport, az ország egyik legnagyobb raktárkészletével és legsokoldalúbb palettájával rendelkezik. Mezőgazdasági, talajmegmunkáló gépek, építőipari, kommunális, kertészeti, zöldség és gyümölcstermesztés,...
Automatic translation
Advertiser for 9 years
New
Copper scythe Bács-Kiskun, Kecskemét
Dear Farmer! The Royal Tractor Group has one of the largest stock and most versatile ranges in the country. Our machinery dealers offer agricultural, tillage, construction, municipal, horticultural, fruit and vegetable and forestry machinery at the...
Automatic translation
2.250.000 HUF +VAT
|A pavilon 201A
Copper scythe Szabolcs-Szatmár-Bereg, Nyíregyháza
Lateral shredder for cleaning roadways, ditches, embankments, gardens and green areas. With hydraulic tilting angle up to 90° vertical position for pruning and shredding hedges. Recommended for mowing, pruning and cutting branches up to 4 cm in...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
HYMACH JUICE and FRUIT are recommended for crushing vineyards and orchards, as well as for mowing and maintenance of vegetation in large public parks, roadside areas, ditches and embankments. The HYMACH JUICE and FRUIT rear-mounted, laterally...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The AGRIMASTER EXPERT SHARK copper trenchers can be used for cleaning and maintenance of ditches, gullies, roadside areas, parks and other agricultural and communal areas. Recommended for professional users. Minimum tractor weight (kg): 1800 TLT...
Source language: Hungarian
3.331.280 HUF +VAT
Advertiser for 15 years
New
Copper scythe Pest, Gödöllő
BERFALK BM 482 teljesen olasz gyártású professzionális rézsűkaszák utak, árokszélek, sövényfalak, gyepterületek karbantartására, kommunális feladatok elvégzésére 45-70 LE traktorokhoz. - Nagy térfogatú 160 l acél olajtartály elektromos ventilátorral...
Source language: Hungarian
3.243.257 HUF +VAT
Advertiser for 15 years
New
Copper scythe Pest, Gödöllő
BERFALK BM 380/432 teljesen olasz gyártású professzionális rézsűkaszák utak, árokszélek, sövényfalak, gyepterületek karbantartására, kommunális feladatok elvégzésére. - Nagy térfogatú 160 l acél olajtartály elektromos ventilátorral működtetett...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Standard equipment: - Independent hydraulic equipment with gear hydraulics, pump and hydraulic motor. - Independent hydraulic power unit with independent hydraulic pump and independent hydraulic transmission (540 min-1 for TLT). - Heat exchanger. -...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
"With the latest generation of Kawasaki EFI engines, the SPIDER mower is unbeatable - on any terrain. Key features: - area output: 8500 m2/h - Working width: 123 cm - Maximum slope: 60°. - control: radio remote control - own weight: 387 kg The...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
The HYMACH ESPRIT TDH L/TC is also recommended for professional users for the maintenance of vegetation in medium surface public parks, roadside areas and ditch banks, embankments and for crushing stems. The ESPRIT TDH is a good choice for both...
Automatic translation
Advertiser for 4 years
New
Copper scythe Pest, Szada
Working width (cm): 110 Min. power requirement (HP): 20 TLT (f/p): 540 Weight (kg): 236 Y number of blades (pcs): 56 The AGRIMASTER MICRO outboard mowers can be used for the maintenance and mowing of parks, public areas, road verges and ditch banks,...
